• Skip to main content

Best Management Practices for New York State Golf Courses

☰
  • About Us
  • BMP Publication
    • 1 Introduction
    • 2 Site Analysis
    • 3 Planning, Design, and Construction
    • 4 Irrigation
    • 5 Water Quality Management and Monitoring
    • 6 Nutrient Management
    • 7 Cultural Practices
    • 8 Integrated Pest Management
    • 9 Pesticide Management
    • 10 Pollinator Protection
    • 11 Maintenance Operations
    • 12 Landscape
    • 13 Facility BMPs
    • Acknowledgements
    • References
    • Acronyms
  • Blog Posts
  • BMP Vlog Series with Dr Rossi
  • Case Studies
  • Current Projects/Reports
  • How to Videos and Publications
  • NY BMP 1st Edition

 

Best Management Practices for New York State Golf Courses
HOME

Ken Benoit

A Foundation for Sustainability: The New York Golf Course Foundation

May 2, 2022 by Ken Benoit

April 23, 2019 by NYS BMP ·

The New York Golf Course Foundation (NYGCF) is a newly launched non profit to promote sustainable golf management efforts in New York State. This new organization is an evolutionary step for the New York State Best Management Practices (BMPs) project begun in 2012 that established the state’s first golf industry BMPs.

The foundation’s mission is to continue and expand upon the work of the BMP committee, raise the profile of the state’s golf industry with respect to its environmental sustainability efforts, and to fundraise to provide a sustainable source of revenue to continue these efforts. Scientists from Cornell University will continue working with NYGCF to update the BMPs, address new topics as the need arises, and provide education to the superintendent target audience.

The current focus of the NYGCF is outreach and education aimed at promoting the acceptance and implementation of BMPs by the state’s golf course superintendents. In addition, the Foundation will continue to promote the recognition of BMPs as the best way to protect and preserve our water resources and enhance open space. State lawmakers and regulators have applauded our past efforts and the Foundation’s directors will continue to inform these key stakeholders of the activities of the new Foundation.

Under a current Turf Environmental Stewardship Foundation (TESF) grant, the foundation is working on an update to the state’s BMPs that will be incorporated into a template that can be used by any superintendent in the state to create a site-specific facility BMP. Once completed, the foundation will provide information and workshops for superintendents to become more familiar with the process of completing their own BMP document. Taking the time to create a facility BMP can pay off in a number ways; for example, superintendents can use their site-specific BMP document as a resource during the permit negotiating process with local towns by recognizing the club’s commitment to protecting water quality or as a tool to educate golfers and/or the interested non-golfing public regarding the industry’s commitment to environmental stewardship. The facility BMP tool is expected to be available to superintendents through the GCSAA’s BMP portal by October.

In addition to the facility BMP template development, the Foundation is currently working on re-establishing its Twitter feed (@NYS_GolfBMP), publishing new blogs on the website, and documenting case studies of BMP implementation. The Twitter feed, blogs, and case studies are designed to inform, update, and educate superintendents about time sensitive BMP-related methods for completing various environmentally sensitive tasks. The NYGCF will also continue maintaining and updating the BMP website (https://nysgolfbmp.cals.cornell.edu/).

We invite superintendents to subscribe to the Twitter feed, submit case studies (through the website comment field), and read our blog.

Filed Under: Uncategorized

No Kidding: Using Goats to Control Vegetation

May 2, 2022 by Ken Benoit

April 22, 2019 by NYS BMP

At Whippoorwill (country club?) buffer strips around ponds on the property had become overgrown and encroached upon by invasive species. Because of the rocky, steep hillside, chemical control was not an option and physical removal difficult.

To control the growth, an innovative approach to vegetation removal was utilized: goats. Goats are browsers who prefer brushy vegetation and vines (including poison ivy) versus other species like sheep who prefer to graze on grass. Goats are also unique in weed seeds are left unviable after being digested and will not grow out of their excrement.

Green Goats, a company out of Rhinebeck NY, was used to introduce goats and set up fencing. Three foot livestock fencing powered by a solar powered fence charger was used to enclose the area for the goats.

The project was very successful and areas that were completely overgrown were cleared of  foliage within a couple of weeks. It also provided a significant cost savings – estimated at $15,000 less than what would have been spent to remove the overgrowth physically. In addition, because of the conservation easement on the property, goats were the only viable option for clearing the overgrown areas. The area cleared by the goats will be replanted with native species.

Because of the project’s success, goats will be brought back to new areas. Though very successful, the goats did have one unintended side effect: they slowed play. As members passed the area, man would stop to see the goats and take pictures.

Filed Under: Uncategorized

What’s In Your Spill Kit?

May 2, 2022 by Ken Benoit

April 22, 2019 by NYS BMP ·

Spills happen and being prepared can make the difference between being able to safely contain the spill and not.  Have you checked your spill kit recently to make sure you have everything you may need? The following is a checklist for what should be in your spill kit at a minimum to make sure a small issue does not become a bigger problem:

  • Gloves (nitrile, at least; foil barrier laminate better)
  • Tyvek® coverall
  • Goggles
  • Temporary storage container for spill
  • Sorbent pads and/or socks
  • Loose absorbent (SlikWik®, vermiculite)
  • Sweeping compound
  • Warning sign or caution tape
  • Chalk (for marking spill area on floor)
  • Dust pan or small shovel (plastic preferable)
  • Small broom
  • Permanent marker (for marking spill container after clean-up)

Forms of Sorbents 

  • Booms: cylindrical shape; vary in length and width; used to control and contain spills
  • Socks or mini booms: cylindrical shape; vary in length and width; used in facility spill response or maintenance; contain spills or leaks (placed around equipment)
  • Pillows: rectangular in shape; used for medium size spills; can be used for leaks and drips
  • Pad and rolls: flat sorbent sheets of various lengths can be used to line shelves, catch leaks under machinery and clean up spills
  • Loose sorbents: sorbent media that is not contained in any type of pillow or mesh; typically used on small spills

Sorbent Categories 

  • Universal sorbents: designed to absorb any liquid; they will absorb aggressive liquids such as acids and bases as well as non-aggressive liquids and solvents, such as cleaners, water-based fluids, gasoline and alcohol; made of polypropylene or expanded silicate materials.
  • Petroleum sorbents (“oil-only sorbents”): designed for absorption of oil and/or petroleum-based liquids; these sorbents are hydrophobic (will not absorb water or water-based liquids); can be used in maintenance applications for hydraulic and engine oil cleanup; made of polypropylene or treated cellulose.
  • Maintenance sorbents: absorb non-aggressive liquids commonly found in manufacturing and maintenance operations (coolants, lubricants, oils, cutting fluids) will pick up water-based as well as oil-based fluids; made of recycled materials, such as cotton, wool, cellulose or corn cob; can also be made of polypropylene or any combination of the materials listed.

 Sorbent capacity: The amount of weight the sorbent will absorb in relation to itself (e.g., absorbs 12 times its weight) or the liquid capacity of the sorbent (e.g., absorbs 8 gallons). Because all liquids don’t weigh the same per gallon, the weight capacity of the sorbent actually varies from liquid to liquid. A more accurate way to assess the sorbent capacity is by its liquid capacity.

For more information and suppliers, see Cornell’s Occupation & Environmental Health Department’s Recommendations – Pesticide Spill Kit Contents.

Filed Under: Uncategorized

  • « Go to Previous Page
  • Go to page 1
  • Interim pages omitted …
  • Go to page 4
  • Go to page 5
  • Go to page 6
  • Go to page 7
  • Go to page 8
  • Interim pages omitted …
  • Go to page 12
  • Go to Next Page »
acknowledgementsAcknowledgements
referencesReferences
acronymsAcronyms
contactContact

The full NYGCF BMPs document is available for download · Copyright © 2025 · Best Management Practices for New York State Golf Courses